Nuclear Submarine Light Restoration. Cold War Restoration

I bought what I (and the seller) thought was a rusty ship light for 30 euros to restore it. After doing some research on ebay etc., I found the lights were probably from a nuclear submarine and worth well over 200 euros. Pretty great find. And it was a lot of fun to restore it even though all the rusted bolts and screws gave me some gray hair.

The disassembly on this project took a lot of time. Probably half of the screws were so badly stuck I was almost not able to open them and some of them broke. Even after soaking the parts in rust remover some of those would rather brake than open. I drilled those holes open and made new threads for those. I also had to make most of the broken screws by myself but I left that out from the video. Basically I used a normal screw as a base and rounded the heads and cut them to desired length. Rounded tops are not common these days so I couldn’t find any of those from shops near me.

After I had used rust remover I used paint stripper to remove the old paint. The parts were painted with light gray, like it originally was. This paint doesn’t need a base coat underneath. I didn’t fill/file all the casting marks to keep the original look and because I fell this type of item doesn’t need to be all completely even and shiny. That would also have required me to remove a lot of material as there were some deep pits from the casting process. I also nickel plated all the steel parts that were left outside the shell to protect those from rusting again.

I had to do a slight modification for the electronics. The lamp originally had some wire running to other lamps but since I only had one lamp I decided it’s better to remove those rather than leave cut wires with live electricity inside the lamp. I thought it would be fun to add an alarm noise and time relay to the switch so it would have this alarm effect like there was an emergency or a missile launch.

Tip: a free way to support my channel is access amazon/ebay to do your regular shopping through these links. I will get a small fee from each product bought on amazon after clicking these links, whether it was the linked product or a different one.

---------------------------------------------------------------------
Patreon: https://www.patreon.com/oddtinkering
T-Shirts: https://teespring.com/stores/odd-tinkering-2
Instagram: https://www.instagram.com/odd.tinkering/

Tools used in this video :
SCREW DRIVER SET: https://amzn.to/2F3n6kO
RUST REMOVER: https://www.mc-51thebestrustremover.com/?ref=YbUD-0E4NKfV
ROTARY TOOL: https://amzn.to/2WF75I6
POLISHING KIT: https://amzn.to/31w983l
NICKEL ANODE: https://amzn.to/2J62kTy
NICKEL PLATING SOLUTION: https://amzn.to/2oW0qOk

Other tools:
CHUCK NORRIS’ TOOTHBRUSH: https://amzn.to/2YfXUj2
CORDLESS DRILL: https://amzn.to/2Wois77

MY FILMING GEAR:
MAIN CAMERA: https://amzn.to/2JvtKox
MAIN TRIPOD: https://amzn.to/2OlpYgn
MICROPHONE: https://amzn.to/2I80iDz
VIDEO LIGHTS: https://amzn.to/2FpJDaB
MAIN LENS: https://amzn.to/2Fm8yMk
CINEMATIC LENS: https://amzn.to/2TmNdHH
WIDE ANGLE LENS: https://amzn.to/2U7iJha
GOPRO: https://amzn.to/2U3eqU3


---------------------------------------------------------------------
SUBSCRIBE ▶▶▶ https://www.youtube.com/channel/UCf_s...
---------------------------------------------------------------------

Restoration playlist▶ https://www.youtube.com/playlist?list...

---------------------------------------------------------------------

Próximo episódio

S01E77 - Zippo lighter restoration - US Army lighter brought back to life